Utah Administrative Code
The Utah Administrative Code is the body of all effective administrative rules as compiled and organized by the Division of Administrative Rules (Subsection 63G-3-102(5); see also Sections 63G-3-701 and 702).
NOTE: For a list of rules that have been made effective since July 1, 2014, please see the codification segue page.
NOTE TO RULEFILING AGENCIES: Use the RTF version for submitting rule changes.
R68. Agriculture and Food, Plant Industry.
Rule R68-1. Utah Bee Inspection Act Governing Inspection of Bees.
As in effect on July 1, 2014
Table of Contents
- R68-1-1. Authority.
- R68-1-2. Registration.
- R68-1-3. Apiary Identification.
- R68-1-4. Assistance in Locating Apiaries.
- R68-1-5. Salvage Operations.
- Date of Enactment or Last Substantive Amendment
- Notice of Continuation
- Authorizing, Implemented, or Interpreted Law
Promulgated under the authority of Section 4-11-3.
Every owner or person coming into possession of one or more colonies of bees within the State of Utah shall register with the Department of Agriculture and Food in accordance with the provisions in Section 4-11-4.
Each apiary location whether permanent or temporary shall be identified by a sign showing the owner's registration number issued by the Utah Department of Agriculture and Food at least one inch in height, easily readable and displayed in a conspicuous location in the apiary; or similar identification conspicuously displayed on one or more hive bodies within the apiary. Any apiary not so identified shall be considered abandoned and shall be subject to seizure and destruction as provided for in Section 4-11-14.
All beekeepers shall personally assist the department or county bee inspectors in locating their apiaries, or provide accurate and detailed information as to location of all bee hives under their control or possession.
All salvage operations with respect to wax, hives and appliances from diseased colonies shall be performed in a tightly screened enclosure to prevent the entrance of bees according to the following procedure:
A. Frames and comb from the diseased hives shall be held for at least 30 minutes in boiling water (212 degrees F) before any wax is removed.
B. After removal from the boiling water the frames must be destroyed or boiled for a minimum of 20 minutes in a solution of lye water containing no less than 10 pounds of lye (Sodium Hydroxide) for each 100 gal. of water.
C. Hive bodies, supers, covers and bottom boards must be thoroughly scorched or boiled for a minimum of 20 minutes in the lye water solution.
August 25, 2010
For questions regarding the content or application of rules under Title R68, please contact the promulgating agency (Agriculture and Food, Plant Industry). A list of agencies with links to their homepages is available at http://www.utah.gov/government/agencylist.html or from http://www.rules.utah.gov/contact/agencycontacts.htm.